| “This site contains affiliate links for which OEMDTC may be compensated” |
L824-A.07.08
| To | All Lamborghini Dealers and Licensed Service Point |
| From | Customer Service Department |
| Subject | Replacement of the rear drive shafts bolts |
| Group | 824.5.05 |
| Date | 10.12.2008 |
| Pages | 5 |
Subject
Replacement of the rear drive shafts bolts.
Model / VIN-Range
Murcielago and Murcielago LP 640 Coupè and Roadster.
From VIN 6LA1713 to VIN 8LA2752 inclusive.
Attention: As not all vehicles from this VIN range are affected, please carefully check on the Lamborghini Web-portal VIN-Info section if the vehicle is affected by this Service Campaign before the start of any updating.
Information to the field
As a result of company’s continuous product monitoring, Automobili Lamborghini S.p.A. has found that, in some vehicles, a change in the production procedure has caused a reduced tightening torque at the bolts in the rear differential drive shafts. This could cause noise while driving.
In case you have an involved vehicle in the workshop Lamborghini recommends to perform this rework action for the rear shafts.
To avoid future customer complaint each dealer has to contact his customers to perform the service campaign.
This rework action must be also performed on all cars in your stock immediately.
Field solution
Follow the workshop instruction in this document for the bolts replacement.
Spare Parts
One repair kit per car is necessary, code 0R1470169 available on spare parts catalogue.
All the parts changed have to be scrapped at the dealership.
Additional material
50 ml of oil of one of the following types of fluid:
- Agip Sint 2000 Evolution SAE 5W/40
- Agip TecSint
- Castrol TXT Softec SAE 5W/40
Loading...
Reload document 
Open in new tab
