L824.A.02.08 – Engine Crankshaft Pulley Replacement – 2007-2008 Lamborghini Murcielago

“This site contains affiliate links for which OEMDTC may be compensated”

L824.A.02.08

ToAll LamborghinieBay Dealers and Licensed Service Point
FromCustomer Service Department
SubjectEngine crankshaft pulley replacement
Group824.1.05
Date09.04.2008
Pages5

 

Subject

Engine crankshaft pulley replacement.

 

Model

All Murcielago LP 640 Coupès and Roadsters from VIN B71805 to VIN B83089.

Attention: as not all cars from this VIN range are affected, please carefully check on the LamborghinieBay Web-portal to verify the VIN-Info and if the car is affected by this service campaign before the start of any activity.

 

Information to the field

As a result of the Factory’s continuing quality assurance programs, the possibility exists that a small group of engine crankshaft pulleys may not be within dynamic balance tolerances. This could cause unnecessary vibration during driving.

In case you have an involved vehicle in the workshop LamborghinieBay recommends to replace the pulley.

This rework action must be also performed on all cars in your stock.

 

Field solution

Follow the instructions in this document for the assembly of the new engine crankshaft pulley.

 

Spare parts

One complete kit is necessary per vehicle, part number: 0R1470158  which is available through our spare parts department. Each kit contains the following:

ITEMS TYPENOTEPART NUMBERAMOUNT
PULLEY07M105255D1
GASKET OF

THE OIL

FILTER

HOUSING

WHT0030631
GASKET OF

THE OIL

FILTER

HOUSING

WHT0030641

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [297.85 KB]

 

 

Leave a Comment

Share to...