“This site contains affiliate links for which OEMDTC may be compensated” |
L140-A.06.05
To | All Lamborghini![]() |
From | Customer Service Department |
Subject | Service Campaign – Gallardo rear fender side air intakes sealing |
Group | 140.8.21 |
Date | 19.09.2005 |
Pages | 7 |
Subject
Gallardo rear fender side air intakes sealing
Model / VIN-Range
Gallardo models until VIN 2785
Information to the field
In case you have a vehicle in the workshop Lamborghini recommends sealing the internal connecting joints of the rear fender side air intakes.
This modification must be performed on all cars involved at the next service.
Lamborghini recommends carrying out this upgrade aiming to extend the life of these components.
Field solution
Sealing the internal connecting joints of the rear fender side air intakes.
Spare Parts
– Polyurethane adhesive sealant (half a cartridge for each car), available at Spare Parts department – p.n. 900000125
Each dealer/service will receive 8 sealant cartridges with the next spare parts delivery. For following orders you will receive a minimum quantity of 8 cartridges for each delivery.
Necessary material
– Polyurethane adhesive sealant (A) (half a cartridge each car), available at the Lamborghini warehouse – p.n. 900000125.
– Cleaning degraesing solution (use a commercial product)
– Gun applicator for the adhesive sealant (C).
– A rubber pipe extension (about 60 cm length) (D) or a paintbrush (E) for sealant application.