L140-A.07.05 L140-A.08.05 – Fixing of Gallardo Shock Absorbers Covers – 2005 Lamborghini Gallardo

“This site contains affiliate links for which OEMDTC may be compensated”


To All Lamborghini Dealers and Licensed Service Point
From Customer Service Department
Subject Service campaign – Fixing of Gallardo Shock Absorbers Covers
Group (front) and (rear)
Date 18.07.2005
Pages 7



Fixing of the Gallardo shock absorbers protection covers.


Model / VIN-Range

All Gallardo models until VIN ZHWG_11_ _5LA02579


Information to the field

In case you have a vehicle in the workshop, Lamborghini recommends fixing the shock absorbers protection covers.

This modification must be performed on all cars involved at the next service.

Lamborghini recommends carrying out this upgrade aiming to extend the life of these components.

Important remark: on cars equipped with Lifting System this rework must be performed only on the rear shock absorbers


Field solution

Fix shock absorbers protection covers in the right position with glue.


Spare Parts

No spare parts needed.


Necessary material

3M Scotch-Weld Structural Plastic Adhesive DP8005 Translucent Duo-Pak, 38ml (please contact the local 3M dealer – www.3m.com for more information).


Gun 568 applicator – manual – EPX
Nozzle MMS 40035 for 8005 – DP 4000 – 10:1
Plunger MMS 4000 for 8005 – EPX – 10:1
Glue MMS 8005 – DP Scotch Weld – MC 38


Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [248.30 KB]



Leave a Comment

Share to...