| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V391
Manufacturer Automobili Lamborghini
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 1,700
Engine may Stall at Low RPM while Downshifting
An engine stall can increase the risk of a crash.
Summary
Automobili Lamborghini (Lamborghini) is recalling certain 2012-2018 Lamborghini Aventador Coupe and Roadster vehicles. The engine may stall unexpectedly during certain driving conditions such as when the accelerator pedal is released below 2000 rpms while the transmission is automatically down shifting to a lower gear.
Remedy
Lamborghini will notify owners, and dealers will install updated engine software, free of charge. The recall is expected to begin August 3, 2018. Owners may contact Lamborghini customer service at 1-866-681-6276. Lamborghini’s number for this recall is L73X-R.02.18.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Herndon, June XXth, 2018
Engine software update Lamborghini Aventador MY 2012 to 2018
Dear valued Lamborghini Sales and Service Manager,
In the course of continuous product monitoring and internal tests, Automobili Lamborghini S.p.A. has determined that The estimation of the fuel flow through the purge valves made by the engine software may lead to a irregularity of the idle with consequent possible engine stall.
For affected vehicles under certain driving conditions (with the accelerator pedal released and below 2000 rpm in conjunction with automatic shifts from high to low gears, in the idle approach) an engine stall event may happen without warning.
The engine can switch off at low rpm therefore compromising the servo steering and brake booster functionalities. However, it is still possible to restart the engine after the problem occurrence.
For all the reasons listed above, these vehicles must therefore be upgraded to the latest technical features.
The instructions for upgrading the vehicles are available on the Lamborghini Dealer Portal section “Service and Recall Campaigns”.
In order to further support you in answering questions to your customers, we are attaching the FAQ (Frequent Asked Question) you must follow to. Since these activities are extremely important, we are confident you will make every effort to ensure that the vehicles are upgraded in the shortest time possible.
The time line dates for this recall are listed below:
- Customer notification starting from August 03rd;
- Part ordering starting from August 03
For further information please don’t hesitate to contact your responsible Area Manager.
Yours sincerely,
Alessandro Farmeschi
Chief Operating Officer
Automobili Lamborghini America LLC
Rene Sueltzner
Head of After Sales
Automobili Lamborghini America LLC
Questions and answers
Lamborghini Aventador, Aventador S, Veneno, Centenario, Super Veloce (all models Coupé and Roadster), Aventador J – model year 2012 – 2018
“Engine software update”
| What is the issue with the affected vehicles? |
| Under certain driving conditions (with the accelerator pedal released and below 2000 rpm in conjunction with automatic shifts from high to low gears, in the idle approach) an engine stall event may happen without warning. |
| What is the cause of this condition? |
| The estimation of the fuel flow through the purge valves made by the engine software may lead to a irregularity of the idle with consequent possible engine stall. |
| What effect does the condition have? |
| The engine can switch off at low rpm therefore compromising the servo steering and brake booster functionalities.
However, it is still possible to restart the engine after the problem occurrence. |
| How can the condition be identified? |
| No particular customer perception just before the stall. |
| Is there any risk for the car occupants? |
| Automobili Lamborghini S.p.A. is not aware of any accidents or other incidents resulting in injury to a person or damage to property. |
| Which vehicles are affected ? |
| Lamborghini Aventador and Aventador S, Veneno, Centenario, Super Veloce (all models Coupé and Roadster), Aventador J. Model year 2012 -2018. |
| How many vehicles are affected worldwide ? |
| 6893 units |
| Which VIN numbers are affected? |
| from ZHWEC1476CLA00091 to ZHWEG4ZD2JLA06939; manufactured from March 2011 to November 2017 |
| What exactly needs to be updated on the car? |
| The engine software |
| How long will the repair work take? |
| Normally, the repair work will take 1 hour. |
| Will Automobili Lamborghini S.p.A. bear the costs of the repair work? |
| The costs of this campaign will be borne entirely by Automobili Lamborghini S.p.A. |
| Where can I have the repair work carried out ? |
| Any authorized Lamborghini dealer and Service point worldwide. |
| Is it necessary to make an appointment at the workshop? |
| Yes, customer should contact an authorized Lamborghini dealer or Service point. |
Engine software update Lamborghini Aventador MY 2012 to 2018
June XXth, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V391-6149.pdf
Loading...
Reload document 
Open in new tab
Questions and answers
Lamborghini Aventador, Aventador S, Veneno, Centenario, Super Veloce (all models Coupé and Roadster), Aventador J – model year 2012 – 2018
“Engine software update”
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V391-8307.pdf
Loading...
Recall Acknowledgement
July 9, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V391-7499.pdf
Loading...
Reprogramming
Information for reprogramming
This section provides you with all the information on the diagnosis services for Lamborghini vehicles.
General Information
Lamborghini offers independent operators the opportunity to perform diagnosis via special software that can write data in the Immobilizer and reprogram the engine and gearbox control units, using commercial interfaces that comply with SAE J2534 and J2534-1 standard.
This standard outlines the specifications necessary for a generic peripheral device (hardware) to interface with vehicles.
You must register on the Lamborghini portal before you can download the software.
The software may be used only upon purchase of the relative licenses, which permit the software to be used for limited periods.
Hardware tools
The following commercial interfaces have been tested by Automobili Lamborghini:
- Car DAQ-Plus cable bundle (ditta Drew Technologies)
- VSI-2534 (ditta DGTECH of Dearborn Group)
- iFlash 2534 Global Programmaer (ditta Blue Streak Electronics)
Diagnosis software available for a fee
- Software for reprogramming the engine (starting with MY07) and the gearbox (starting with MY 08) on Gallardo and Murciélago (downloaded from this site upon payment of a fee).
- Software for reprogramming the Immobilizer on Gallardo USA starting with MY09 models are contained on the DVDs (purchased on the erwin USA website)
- Software for reprogramming the Immobilizer on Gallardo EU starting with EU5 type-approved models are contained on the DVDs, (purchased on the erWin Lamborghini website).
- Software for managing the vehicle diagnostics on the complete electronic vehicle platform of Aventador starting with MY12 and Huracán starting with MY15 models are contained on the DVDs (purchased on the erWin Lamborghiniwebsite).
Software licenses
- The engine diagnosis software license (Prk Loader Pass Thru) may be purchased after you have registered on the Lamborghini portal.
Use is limited - at the user's choice - to 30 or 365 days.
- The gearbox and for Gallardo engine starting from MY09 diagnosis software license (LaRa Independent Pass Thru) may be purchased after you have registered on the Lamborghini portal.
Use is limited - at the user's choice - to 30 or 365 days.
- The software license for reprogramming the Immobilizer system (ODIS SERVICE) may be purchased after you have registered on the erWin website (please refer to the erWin website for the terms and conditions of use).
- The software license for offboard diagnosis on Aventador and Huracán (ODIS SERVICE) may be purchased after you have registered on the erWin website (please refer to the erWin website for the terms and conditions of use).
https://serviceinformation.lamborghini.com
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU
reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility. - 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
- 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 【Why Choose LAUNCH scanner X431 PRO5】It is the original LAUNCH X431 scan tool, the 2024 upgraded version of PROS V+, X431 PRO3 and V+ 4.0, which is a worthwhile investment for repair shops and mechanics. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD Series; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online Coding functions directly connect to OEM server; 4) Top-notch Topology Mapping function
- 【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new ISO9141/J1850/SAE J2610/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for B-MW, Ben-z, F-ord, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
- 【New Released Topology Mapping】Update your X431 PRO 5 to V 7.03.014 to gain Topology Mapping function. This advanced feature, typically found only on tools costing over $3000, provides a comprehensive view of a vehicle's data bus configurations, improving repair efficiency by up to 90%. With just one click, you can gain insights into the layout of a vehicle's system and clear any troubles. Compatibility with your vehicle's brand should be verified by checking the VIN before purchasing.
- 【LAUNCH X431 PRO 5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD serious. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year f ree update while other brands generally 1 year.
- 【A-ctive Test + ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 min.This LAUNCH X431 PRO scanner even develops all practical functions needed by all technicians:1) ECU Coding for replacing, match, relearn, recode new ECU modules;2) Online Coding for B-MW, VW, Porsche, Ben-z to surf OEM data;3) VAG Guided functions ease complex issues;4) Personalization & ADAS improving car performance and driving safety.
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
- Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- [ECU Online Programming] Boom your business to new heights! Streamline your programming/rewriting/coding/matching of new ECUs with Online Programming from LAUNCH scanner X431 PRO5 without using OE scan tools: 1) backup/restore programing data; 2) download programing files directly from OE server to upgrade software; 3) support multiple ECU modules while remaining fast & accurate; 4) match component of control modules after repair or replacement. NOTE: Online programing is only for Ben.z&BM.W.
- [J2534 Reprogramming Tool] The included SmartBox 3.0 supports J2534/CAN-FD/DoIP & DC9-36V (for 24V HD vehicles) protocols allowing LAUNCH PRO5 to cover more car types than ever. It also serves as a J2534-PassThru interface for manufacturer-specific ECU programming of more brands such as Toyota, Honda, Volvo, V-W, G.M, etc. provided that you’ve got OE-authorized programming software. NOTE: Message us anytime to get the J2534 programming detailed steps for your easy work.
- [10+ High-End Functions] PRO5 scan tool merges 10+ high-end functions into one inspiring solution to greatly improve your workbench efficiency: 1) ECU coding: replace/match/re-learn/re-code new modules; 2) Online coding refreshes hidden functions/customizes OE settings; 3) VAG guided functions simplify complex VAG diagnostics; 4) active test/personalization/ADAS calibration/BM.W modification and more, constantly growing. This diagnostic scanner can save you loads of repair effort.
- [Topology & More for 200% Efficiency] This LAUNCH scanner added Topology Module Mapping, offering at-a-glance view of the module communication structure that is color-coded, and direct access to all system diagnostics marked with fault codes. One-station solution: all systems scan & all DTCs clearing, graphic live data (can be saved/replayed/screenshot), auto-generated test report, step-by-step guidance, DTC analysis, relevant cases, repair material & tips … all for your 200% efficient use.
- [99% Car Coverage] LAUNCH scanner PRO5 works across 99% major cars on market (160+ brands, -2023). It can fully access FCA SGW-equipped vehicles via verified AutoAuth (compatible with 2017+ Chrysler/Dodge/Jeep/AlfaRomeo/Fiat …), and support Renault diagnostics with RGW-unloc.king device & software (need separate purchase) to perform active tests/programming/coding/anti-theft/initialization, etc. (message us for guidance). With optional software & adaptors, you can even diagnose DC9-36V trucks.
- 🔥【The King of Cost-Effectiveness From Autel】Fully upgraded from Autel MaxiSys EliteII /MS908S Pro/MK908P, Autel Scanner launched 2023 Newest 🅰🆄🆃🅴🅻 MaxiSys Elite II pro. 👉2 Years Free Update, ECU Programming&Coding, 38+ Service, Bidirectional Control, etc. Auto scanning 2.0 with all hardware parameters upgrade, provide total 8 (5+3)x diagnostic speed ✅CAN FD/ DOIP protocols support GM MY2020+ models, BMW E/F/G, Jaguar, Land Rover makes (Elite II can’t).
- 🔥【OE-LEVEL J2534 ECU PROGRAMMING & CODING】Enhance your diagnostics with the Elite II Pro J2534 Reprogramming scanner. This cutting-edge auto scanner supports : 1) program the new adaptive data to the on-board modules 2) replace the existing software/firmware in the ECUs 3) match the component control modules after repair or replacement 4) flash the hidden functions and 5) enhance the vehicle features. Experience 5X faster communication with SAE J2534-1 & -2 compliant programming interface.
- 🔥【38+ Maintenance Functions & High-End Functions】Autel scan tool Elite II Pro shares the same functional and deep service functions with other high-end scanners such as MaxiSys MS909/MS919/Ultra. 38+ special functions such as EPB/SAS/BMS/Oil/ABS/TPMS/Throttle/Injector/Suspension, etc., fix almost all “check engine” light issues. Bi-directional control, guided function, component matching, and scan VIN/license, together offer you effective and convenient diagnostic experiences.
- 🥇【DOIP& CAN FD Protocol, Top Hardware 5X Lightning Speed】Exclusive J2534 brings same DoIP & CAN FD protocol as Ultra/ MS919: CAN FD for GM MY2020+ Models; DOIP for BMW E/F/G Chassis, Jaguar, Land Rover makes. The improved hardware makes ELITE II PRO run more smoothly, even faster than MS919. It’s build with 8-Core CPU, Android 10.0 OS, 9.7’’ 1536*2048 touchscreen, 4GB&128GB, 11,000mAh battery, 2.4&5GHz dual-band WIFI, surpass Elite II/ Elite/ MS908S Pro II/ MK908 Pro II.
- 🔥【Free MV108 Assist Repairs】The MV108 digital inspection camera is designed to work with the MaxiSys series and PC, turning your MaxiSys scanner into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure quickly. One programmer tool Elite II Pro and one Videoscope MV108 make a perfect match.
- 🚗[Technical assistance] If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online
- 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
- 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●Supports Windows 7● CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.
- 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
- 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 7 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.
- CUSTOM-DESIGNED FOR USE WITH FORSCAN and recommended by the FORScan Team
- DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan
- ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with “toggle switch” adapters
- MAXIMUM THROUGHPUT -- up to 20 times faster than “toggle switch” adapters
- ROCK-SOLID CONNECTION avoids data corruption and dropped packets
Last update on 2024-04-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.