November 17, 2022 NHTSA CAMPAIGN NUMBER: 22V848000
Detached rear glass panels may create a road hazard and increase the risk of a crash.
NHTSA Campaign Number: 22V848
Manufacturer Lamborghini
(Automobili Lamborghini
)
Components VISIBILITY
Potential Number of Units Affected 9
Summary
Lamborghini
(Automobili Lamborghini
) is recalling certain 2022 Countach vehicles. Due to a supplier error, the rear glass panels may detach.
Remedy
Dealers will inspect and replace the rear glass panels, as necessary, free of charge. Owner notification letters were mailed January 13, 2023. Owners may contact Automobili Lamborghini
customer service at 1-866-681-6276. Automobili Lamborghini
’s number for this recall is L734-R.01.22.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
L734-R.01.22
Checking rear hood glass assembly
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Automobili Lamborghini
S.p.A. has decided that a defect, which relates to motor vehicle safety, exists in certain Model Year 2022 Countach vehicles. Our records indicate that you are the owner of a vehicle in this recall.
What is the issue?
Due to a supplier error, the rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safety-risk of a crash for following traffic.
For all the reasons set forth above, it is therefore necessary to repair these vehicles. If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information.
What Do You Need to Do?
You can still drive your car, however, please contact your preferred authorized Lamborghini
dealer immediately to schedule an appointment to have this important repair performed, free of charge.
You can locate your nearest authorized Lamborghini
Dealer at
https://www.lamborghini
.com/en-en/ownership/dealer-locator.
What will Lamborghini
do?
We will inspect the vehicles for appropriate bonding of the glass panels and, if necessary, they will be replaced free of charge. The inspection will take approximately 1 (one) hour.
In case replacement of the glass panel is necessary it will take approximately 8 (eight) hours. We apologize for any inconvenience this recall may cause.
Please bring this letter and your Service Booklet with you when you visit the dealer, so that the dealer can make all necessary entries.
Lamborghini
will not offer a reimbursement plan for this campaign as all involved vehicles are new and would be covered under the manufacturer’s warranty program.
Questions and answers
Lamborghini
Countach model year 2022.
“Rear Bonnet Glass Panels”
◼ What is the issue with the affected vehicles?
Incorrect bonding of the rear bonnet glass panels may lead to adhesion issue that could result in a detachment.
◼ What is the cause of this condition?
The defect was caused by an error in supplier’s assembly phase concerning the bonding of the glass panel.
◼ What effect does the condition have?
The rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safety-risk of a crash for following traffic.
◼ How can the condition be identified?
The customer will not receive an advance warning due to the nature of the failure mechanism.
◼ Is there any risk for the car occupants?
Automobili Lamborghini
S.p.A. is not aware of any accidents or other incidents resulting in injury to a person or dam-age to property.
◼ Which vehicles are affected?
Lamborghini
Countach model year 2022.
◼ How many vehicles are affected worldwide?
81 units.
◼ Which VIN numbers are affected?
From ZHWEA9ZD2NLA10980 to ZHWEA9ZD0NLA11450; manufactured from January to July 2022.
◼ What exactly needs to be updated on the car?
Affected vehicles will be inspected for appropriate bonding of the glass panels and, if necessary, they will be replaced, free of charge.
◼ How long will the repair work take?
Normally, the inspection will take approximately 1 (one) hour. In case replacement of the glass panel is necessary it will take approximately 8 (eight) hours.
◼ Can customers continue to drive the cars?
Customers can still drive their cars, however, we encourage them to arrange an appointment with their retailer as soon as possible.
◼ Will Automobili Lamborghini
S.p.A. bear the costs of the repair work?
The costs of this campaign will be borne entirely by Automobili Lamborghini
S.p.A.
◼ Where can I have the repair work carried out ?
Any authorized Lamborghini
dealer and Service point worldwide.
◼ Is it necessary to make an appointment at the workshop?
Yes, customer should contact an authorized Lamborghini
dealer or Service point.
Chronology :
Lamborghini
received on October 10th 2022 one field report from Qatar market concerning a possible issue with one of the four glass panels on the rear bonnet of the model Countach MY22 through its Authorized Dealer Network. No other problem was reported from any other market.
Lamborghini
started a thorough investigation involving the supplier of rear bonnet in an effort to determine a root cause.
On October 25th 2022, Lamborghini
after internal analysis and testing found that the defect was caused by an error in supplier’s assembly phase concerning the bonding of the glass panel. Lamborghini
determined that it is not possible to exclude that other panels could fully detach from the rear bonnet, thereby potentially creating a road hazard.
The outcome of the investigation was presented to the Lamborghini
Product Safety Committee on November 10th 2022 which decided unanimously to launch a proactive recall campaign worldwide. Lamborghini
has not received any reports of a crash or injury due to this topic.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| LAMBORGHINI | COUNTACH | 2022 |
9 Associated Documents
Recall Acknowledgement
RCAK-22V848-4781.pdf 645.137KB
Defect Notice 573 Report
RCLRPT-22V848-4762.PDF 213.953KB
Remedy Instructions and TSB
RCRIT-22V848-7878.pdf 1461.014KB
Questions and Answers: Lamborghini
Countach model year 2022
RMISC-22V848-2703.pdf 66.878KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V848-4047.pdf 255.513KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V848-9620.pdf 141.079KB
Recall Quarterly Report #1, 2023-1
RCLQRT-22V848-4861.PDF 211.133KB
Recall Quarterly Report #2, 2023-2
RCLQRT-22V848-1421.PDF 211.235KB
Recall Quarterly Report #3, 2023-3
RCLQRT-22V848-5385.PDF 211.453KB
- PROFESSIONAL AUTO GLASS BOND: High-strength urethane adhesive bonds windshields securely to vehicle frames for a permanent, weatherproof seal. Helps prevent leaks and withstands road vibrations and extreme temperatures.
- SUPER FAST 1-HOUR CURE: Advanced moisture-curing formula sets quickly with a 10-15 minute work time and achieves safe drive-away strength in as little as one hour (at 73°F). Ideal for professionals to minimize vehicle downtime.
- EASY, NO-MESS APPLICATION: Medium viscosity, non-sag formula won't drip for controlled application on vertical or overhead surfaces. Use any standard 10.5 oz cartridge caulking gun (manual or powered) for precise adhesive placement.
- ONE-PART URETHANE, NO MIXING: Ready-to-use single-component polyurethane adhesive requires no mixing or special equipment. Simplifies windshield replacement with consistent bonding performance and no guesswork.
- VERSATILE & UNIVERSAL USE: Designed for replacing bonded auto glass, including windshields, rear windows, and quarter glass. Also suitable for some non-structural panel bonding applications. Universal fit for cars, trucks, and SUVs.
- Specialized Polyurethane Formula: This windshield adhesive provides a quick-curing, robust bond that eliminates drips & mess. Its non-sagging properties make it suitable for vertical & overhead applications.
- Superior Bonding Strength: Our high-quality polyurethane adhesive ensures a strong hold, absorbing impacts and vibrations to keep your windshield secure, crack-free, & leak-proof even in tough conditions.
- All-Weather Auto Glass Adhesive: This windshield repair adhesive maintains its grip in both high and low temperatures, providing a watertight seal for protection against moisture and rain.
- Easy Application, No Primer Needed: Our polyurethane windshield adhesive comes in a 310ml cartridge compatible with standard caulking guns. Ready to use and includes gloves and an applicator tip.
- Multipurpose Automotive Adhesive: Capable of bonding various parts of vehicles including glass edges, backlights, and sidelights; suitable for cars, trucks, and RVs.
- FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours, not days. OEM-level performance for auto glass replacement and repair.
- HIGH BOND STRENGTH — WON'T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather exposure. The cured seal stays flexible without shrinking or cracking over time — critical for maintaining a watertight windshield.
- WORKS ON VEHICLE & RV GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on cars, trucks, SUVs, vans, and RVs. Bonds glass to metal, fiberglass, and painted surfaces with equal strength.
- EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Includes disposable nitrile gloves and spreader tool for clean, professional results.
- BLACK URETHANE FORMULA — 10.5 FL OZ — Black color matches OEM windshield sealant lines for factory-appearance repairs. One cartridge provides enough adhesive for a full windshield installation on most vehicles.
- GREAT HOLDING POWER: Advanced Mattfix polyurethane windshield adhesive technology delivers strong and reliable adhesion to hold the window firmly in place while creating a secure seal that helps prevent leaks during everyday driving.
- HIGH-STRENGTH BOND: This windshield glue adhesive forms an incredibly strong, durable bond between glass and metal surfaces, ensuring reliable windshield installation without primer while maintaining a permanent holdover time.
- EASY TO APPLY: Easy-to-dispense windshield urethane adhesive flows evenly when used with manual or electric caulking guns, creating a clean, consistent bead without sagging or excessive mess. This car window adhesive is suitable for both professional glass installation and DIY car, SUV, or truck maintenance.
- FAST-CURING FORMULA: Quick-setting windshield adhesive sealant with no-sag properties. It cures rapidly to speed up installation. Mattfix auto glass gluereduces vehicle downtime to just a few hours while delivering a lasting performance.
- WATER & WEATHER RESISTANT: Our car window glue is designed to withstand high and low temperatures, excessive moisture, and road vibrations. This windshield sealant black compound maintains a stable and secure glass positioning during long-term van or motorhome use.
- Strong Adhesion – This windshield glue adhesive absorbs shocks and vibrations to keep windshields securely in place. Prevents cracks and leaks, even on rough roads or under extreme stress.
- Quick-Curing & Non-Drip – Our urethane adhesives formula sets quickly without sagging or dripping, significantly reducing hold time. This allows you to complete vertical and overhead applications faster and with a cleaner, more professional finish.
- Weather-Resistant – Whether it’s sweltering summer heat, freezing winter cold, or even extreme temps from -50°C to 180°C, our formula withstands high and low temperatures, UV rays, and moisture—forming an impenetrable seal that shields your vehicle from downpours and humidity, all for long-lasting performance.
- Easy Application – Our polyurethane windshield adhesive comes in a 300ml cartridge compatible with standard caulking guns. It’s ready to use, includes an applicator tip, and just remember to clean the surface before use for smooth, reliable bonding.
- Multipurpose Automotive Adhesive – This auto glass adhesive seamlessly bonds windshields, backlights, sidelights, and glass edges on any vehicle—from cars and trucks to RVs. Designed for both DIY enthusiasts and professional repairs, it’s the go-to solution for durable, leak-proof results every time.
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 1/6 CONFIDENTIAL Campaign code: L734-R.01.22 Campaign name: Checking rear hood glass assembly Model: Countach LPI 800 4 Model Year: 2022 Limited or special editions: Countach LPI 800 4 Markets: Austria, Belgium, Canada, Czech Republic, Denmark, France, Germany, Italy, Japan, Lebanon, Monaco, Netherlands, Oman, Saudi Arabia, Spain, Switzerland, United Arab Emirates, United Kingdom, United States of America VIN Identification: From 10980 to 11450 Important information: before proceeding with the repair, connect to the Warranty Portal and, using the “VIN Info” function, check that: • the vehicle is actually affected by the instructions contained in this bulletin. NOTE: some vehicles may not be affected, despite the fact that their Vehicle Identification Number (VIN) falls within the range; • only replacement parts that correspond to the specific procedure, identified by a letter (such as A, B, C, etc.), are to be used for the chassis being repaired. Example N.B.: Procedure A will be available only when the instructions require a preliminary check to be performed to determine whether or not the vehicle actually needs updating. Information for the service network: During ongoing product monitoring, Automobili Lamborghini
S.p.A. determined that an incorrect bonding of the rear bonnet glass panels, caused by an error in supplier’s assembly phase, may lead to adhesion issue that could result in a detachment. The rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safety-risk of a crash for following traffic. Solution for the field: Vehicles inspection for appropriate bonding of the glass panels and, if necessary, replacement. Spare Parts: None Management of replaced parts: Store the components that have been removed from the vehicle in an appropriate manner, marking them with their corresponding bar codes so that they can be identified during visits by the competent Area Manager. Labor time: Operation B: 2 h (1 hour per worker) L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 2/6 CONFIDENTIAL Previous bulletins superseded. None. Warranty claim instructions: To request reimbursement for the repair performed, access the “LIASS” system on the Lamborghini
portal and, following the instructions in the system’s “Manuals” section, generate and fill out a Warranty Request. Select the required campaign and proceed with entry; carefully read the options present in the alert message that displayed by the system (see example) and select the option performed on the vehicle. Reimbursement will be structured as follows, on the basis of the operation performed: – OPTION B: Repair method o Steps to be executed: I and II o Labour time: 2 h (1 hour per worker) Important information: attach all documents generated during the work carried out, evidence of the work itself, for instance work orders and diagnostic protocols with BETA-Reports. If one or more of these is missing, it may lead to a rejected reimbursement request. Fill out the page in the warranty booklet (identified in the image below) in the section “Service and Recall Campaigns”: Tools/Materials required The equipment will be supplied by Automobili Lam-borghini without the need for a dealer order. Code Description Qty. 69753002384 Suction Cup 1 69753002383 Dynamometer 1 N.B.(*) All ODIS technical documentation can be viewed on the Lamborghini
web portal, in the ODIS section. L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 3/6 CONFIDENTIAL Repair method: The procedure described here includes the following steps: I. Test for glass number 1 II. Test for glass number 2, 3, 4 IMPORTANT In order to carry out this test, in addition to the suction cup (69753002384) and the dynamome-ter (69753002383) supplied by Automobili Lam-borghini, you will need a rod with a minimum length of 1,5 m (58,95 In) able to resist a force of at least 190 N (20 Kg). NOTE Prepare bodywork protections before the test. Overview of the rear bonnet Glass 1 Glass 2 Glass 3 Glass 4 L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 4/6 CONFIDENTIAL I. Test for glass number 1 IMPORTANT This procedure must be performed with the hood properly mounted in the car; do not per-form this operation with the hood removed or improperly installed. 1. Carefully clean the first glass (use isopropanol) to prepare the surface. The surface must be free of dirt and grease. 2. Position the suction cup and tighten the lever. Check for correct positioning and tightness. IMPORTANT The suction cup must be positioned with the center 7 cm (2,75 In) from the rear edge of glass number 1. This rule applies to all bonnet windows. Example of suction cup positioning for glass 1 3. Turn on and set the dynamometer to Newton. Connect the dynamometer to the suction cup and the rod to the dynamometer top (as shown in the picture). 4. IMPORTANT This operation requires 2 operators. Apply a vertical uniform force on both sides of the rod until a force of 190 N is displayed on dy-namometer. Wait a few seconds and stop the application of the force. L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 5/6 CONFIDENTIAL 5. Check that the glass has not moved or broken. If the glass has moved or broken, it must be replaced; please open a claim on Liass. To perform this operation, follow the procedure in the workshop manual: Repair Manual Special edition LPI-800-Countach MY22 08 Body 27 Engine hood and the spoiler Front Engine Hood Glass Disassembly/Assembly If the glass is properly secured and undamaged, go to step II. II. Test for glass number 2, 3, 4 IMPORTANT This procedure must be performed with the hood properly mounted in the car; do not per-form this operation with the hood removed or improperly installed. 1. To perform the test on the other glasses, follow the same instructions as for glass number 1 (step I). Example of suction cup positioning for glass 2 Example of suction cup positioning for glass 3 Example of suction cup positioning for glass 4 L734- R.01.22 To: After Sales Official Network Subject: Checking rear hood glass assembly Date: 11 January 2023 Pages 6 Rev.01 The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said information. All copyrights are the property of Automobili Lamborghini
S.p.A pursuant to copyright law. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili Lamborghini
S.p.A. Doc. no.: L/V6_M06 Rev.[07] 6/6 CONFIDENTIAL 2. Check that the glasses have not moved or bro-ken. If one or more glasses have moved or broken, they must be replaced; please open a claim on Liass. To perform this operation, follow the procedure in the workshop manual: Glass 2 Repair Manual Special edition LPI-800-Countach MY22 08 Body 27 Engine hood and the spoiler Front Center Engine Hood Glass Disassembly/Assembly Glass 3 Repair Manual Special edition LPI-800-Countach MY22 08 Body 27 Engine hood and the spoiler Rear Center Engine Hood Glass Disassembly/Assembly Glass 4 Repair Manual Special edition LPI-800-Countach MY22 08 Body 27 Engine hood and the spoiler Rear Engine Hood Glass Disassembly/Assembly IMPORTANT: The documents which must be provided together with the operation under warranty request are: – Produced Repair Order – Saved Diagnostic Protocol with BETA report Failure to follow these procedures could lead to the request being rejected. For more information, please contact your Area Manager or write to Technical Support (service.department@lamborghini
.com).
**************************************************************************************************************
Herndon, January 13th, 2023 IMPORTANT SAFETY RECALL NHTSA Recall No. 22V848 This notice applies to your vehicle, VIN Dear Lamborghini
Owner or Lessee, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Automobili Lamborghini
S.p.A. has decided that a defect, which relates to motor vehicle safety, exists in certain Model Year 2022 Countach vehicles. Our records indicate that you are the owner of a vehicle in this recall. What is the issue? Due to a supplier error, the rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safety-risk of a crash for following traffic. For all the reasons set forth above, it is therefore necessary to repair these vehicles. If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information. What Do You Need to Do? You can still drive your car, however, please contact your preferred authorized Lamborghini
dealer immediately to schedule an appointment to have this important repair performed, free of charge. You can locate your nearest authorized Lamborghini
Dealer at https://www.lamborghini
.com/en-en/ownership/dealer-locator. What will Lamborghini
do? We will inspect the vehicles for appropriate bonding of the glass panels and, if necessary, they will be replaced free of charge. The inspection will take approximately 1 (one) hour. In case replacement of the glass panel is necessary it will take approximately 8 (eight) hours. We apologize for any inconvenience this recall may cause. Please bring this letter and your Service Booklet with you when you visit the dealer, so that the dealer can make all necessary entries. Lamborghini
will not offer a reimbursement plan for this campaign as all involved vehicles are new and would be covered under the manufacturer’s warranty program. Automobili Lamborghini
America LLC 2200 Ferdinand Porsche Drive Herndon, VA 20171 USA Automobili Lamborghini
America LLC 2200 Woodland Pointe Avenue Herndon, VA 20171 USA Telephone +1-866-681-6276 Fax +1-248-754-6599 Herndon, January 13th, 2023 ZHWUA9ZD What if you are not the current owner of this vehicle? You can update your vehicle ownership or contact information by filling out the enclosed document (Appendix A) and sending it to Lamborghini
by following the instructions. If you are a vehicle lessor, Federal Regulations require you to forward this notice to your lessee within ten days. What if you have questions or experience problems? Should you need additional assistance, you may contact Lamborghini
Customer Care at: Email at CustomerCareAmerica@lamborghini
.us or by calling 1-866-681-6276 from 9 AM to 5 PM Eastern Time, Monday through Friday. If your Lamborghini
Dealer is unable to remedy the defect without charge and within a reasonable period of time, you may notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, call the tollfree Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.safercar.gov. We would like to invite you to download LAMBORGHINI
UNICA, the app made exclusively for Lamborghini
Customers, from the App Store or Google Play. UNICA can be used to unlock the full functionality of your Lamborghini
. UNICA is also your source for the latest news on the Lamborghini
World including recall alerts, service history, and other important updates. With UNICA, all of this functionality can be managed directly from your smartphone. We sincerely apologize for any inconvenience this recall may cause; however, be assured that Lamborghini
is concerned about your safety and security. Yours faithfully, Andrea Baldi Rene Sueltzner President & CEO Director After Sales Automobili Lamborghini
America LLC Automobili Lamborghini
America LLC Appendix A Automobili Lamborghini
America LLC Customer Service Department 2200 Woodland Pointe Ave Herndon, VA 20171 Email: CustomerCareAmerica@lamborghini
.us Fax: + 1-248-754-6599 Vehicle Identification Number (VIN) Vehicle cannot be checked because it has been: Scrapped stolen sold to a domestic buyer sold to an overseas buyer to new address: Name: ___________________________________________________ First name: ________________________________________________ Street: _____________________________House No.: _____________ ZIP code: _______________City: _______________________________ Country: ___________________________________________________ __________________________________________________________ Date / signature: Appendix A Automobili Lamborghini
America LLC Customer Service Department 2200 Woodland Pointe Ave Herndon, VA 20171 Email: CustomerCareAmerica@lamborghini
.us Fax: + 1-248-754-6599 Vehicle Identification Number (VIN) Vehicle cannot be checked because it has been: Scrapped stolen sold to a domestic buyer sold to an overseas buyer to new address: Name: ___________________________________________________ First name: ________________________________________________ Street: _____________________________House No.: _____________ ZIP code: _______________City: _______________________________ Country: ___________________________________________________ __________________________________________________________ Date / signature:
**************************************************************************************************************
INTERNAL Recall Campaign: Rear Bonnet Glass Panel on Lamborghini
Countach MY 2022 S. Agata Bolognese, Italy, January 11th, 2023 Dear valued Lamborghini
Sales and Service Manager, In the course of continuous product monitoring and internal tests, Automobili Lamborghini
S.p.A. has determined that a defect that relates to motor vehicle safety exists in certain 2022 Countach vehicles. Incorrect bonding of the rear bonnet glass panels, caused by an error in supplier’s assembly phase, may lead to adhesion issue that could result in a detachment. The rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safetyrisk of a crash for following traffic. For the reason listed above, in a precautionary manner, Automobili Lamborghini
decided to launch a worldwide recall campaign to rework the involved cars. The repair instructions are now available on the DMS section “Service and Recall Campaigns” as well as on LIASS. In order to further support you in answering questions to your customers, we are attaching the FAQ (Frequent Asked Question) you must observe. Since these activities are extremely important, we are confident you will make every effort to ensure that the vehicles are repaired in the shortest time possible. For further information, please do not hesitate to contact your responsible Area Manager. Every affected inventory vehicle must be REMEDIED BEFORE DELIVERY TO CONSUMERS. Therefore, please carry out following Stop Sale/Stop Delivery immediately. INTERNAL IMPORTANT REMINDER: VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Ensure all relevant dealership personnel are aware of this notice so they are able to address customer questions. Owners of affected cars will be notified in writing on January 13th 2023. Yours sincerely, Automobili Lamborghini
S.p.A. ________________________ ________________________ Alessandro Farmeschi Maria Francesca Portincasa After Sales Director Head of Legal
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-848 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Lamborghini
(Automobili Lamborghini
) Submission Date : NOV 17, 2022 NHTSA Recall No. : 22V-848 Manufacturer Recall No. : L734-R.01.22 Manufacturer Information : Manufacturer Name : Lamborghini
(Automobili Lamborghini
) Address : Via Modena 12 Sant’Agata Bolognese (BO) 40019 – Italy 00 99999 Company phone : 999 Population : Number of potentially involved : 9 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Automobili Lamborghini
Countach Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : HYBRID ELECTRIC Descriptive Information : The recall population was determined through production records. Vehicles not affected by the recall have correct rear bonnet glass panels bonding. Production Dates : JUN 30, 2022 – JUL 28, 2022 VIN Range 1 : Begin : ZHWUA9ZD9NLA11359 End : ZHWUA9ZD7NLA11442 Not sequential Description of Defect : Description of the Defect : Incorrect bonding of the rear bonnet glass panels may lead to adhesion issue that could result in a detachment. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The rear bonnet glass panels could fully detach from the vehicle, creating a road hazard and increasing the safety-risk of a crash for following traffic. Description of the Cause : The defect was caused by an error in supplier’s assembly phase concerning the bonding of the glass panel. Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-848 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Rear Bonnet Glass Panel Component Description : Rear Bonnet Glass Panel Component Part Number : 47F845155 Supplier Identification : Component Manufacturer Name : C.P.C. Group Address : Via Del Tirassegno, 55 Modena 41122 Country : NR Chronology : Lamborghini
received on October 10th 2022 one field report from Qatar market concerning a possible issue with one of the four glass panels on the rear bonnet of the model Countach MY22 through its Authorized Dealer Network. No other problem was reported from any other market. Lamborghini
started a thorough investigation involving the supplier of rear bonnet in an effort to determine a root cause. On October 25th 2022, Lamborghini
after internal analysis and testing found that the defect was caused by an error in supplier’s assembly phase concerning the bonding of the glass panel. Lamborghini
determined that it is not possible to exclude that other panels could fully detach from the rear bonnet, thereby potentially creating a road hazard. The outcome of the investigation was presented to the Lamborghini
Product Safety Committee on November 10th 2022 which decided unanimously to launch a proactive recall campaign worldwide. Lamborghini
has not received any reports of a crash or injury due to this topic. Description of Remedy : Description of Remedy Program : Affected vehicles will be inspected for appropriate bonding of the glass panels and, if necessary, they will be replaced. Lamborghini
will not offer a reimbursement plan under this recall as all affected vehicles are still under warranty. How Remedy Component Differs from Recalled Component : In case a replacement is necessary, the spare glass panel installation will be carried out according to manufacturer specification. Part 573 Safety Recall Report 22V-848 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : Vehicles produced from mid October 2022 have been inspected for proper bonding of rear bonnet glass panels and the assembly process was assessed and revised in order to prevent unknown variables. Recall Schedule : Description of Recall Schedule : Customers will be notified by registered mail and customer app; while dealers through Lamborghini
dealer portal. Planned Dealer Notification Date : JAN 09, 2023 – JAN 09, 2023 Planned Owner Notification Date : JAN 13, 2023 – JAN 13, 2023 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





