L824-A.04.08
| To | All US and Canadian Lamborghini Dealers and Licensed Service Points |
| From | Customer Service Department |
| Subject | Repositioning of the SDARS antenna |
| Group | 824.0.35 |
| Date | 25.11.2008 |
| Pages | 5 |
Subject
Repositioning of the SDARS antenna.
Model/VIN Range
All Murcielago LP 640 Coupès and Roadsters.
From VIN B93254 to VIN B83392 inclusive.
Attention: As not all vehicles from this VIN range are affected, please carefully check on the Lamborghini Web-portal VIN-Info section if the vehicle is affected by this Service Campaign before the start of any updating.
Information to the field
As a result of company’s continuous product monitoring, Automobili Lamborghini S.p.A. has found that, in some vehicles, the SDARS could be improperly positioned and a bad audio reception could result. Therefore it may be necessary to reposition the antenna following the instructions in this bulletin.
Spare Parts
None required.
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- WARRANTY: BOSS Audio Systems provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- 23% Increase of Thermal Mass Per Square Inch
- Small Chassis Design
- OEM Vehicle Integration
- POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
This product presentation was made with AAWP plugin.